Tel: +86 13969882010

E-mail: caster@fushengde.net

Banner
Home > News > Content
Instructions and precautions for leveling casters
- 2020-09-23-

Qingdao Fushengde Plastic Co., Ltd. is a professional manufacturer of casters. The company produces level-adjusting casters with excellent materials and sufficient supply. The following are the precautions, installation and usage methods of the product:

1. Matters needing attention

The choice of using horizontal casters can be determined according to the movement or fixed and heavy load of the equipment.

If more than 4 casters are used, the weight of the object may only be concentrated on the 2 casters. So even if more than four casters are installed, it may not be able to bear more weight.

It is recommended that the weight of the object should not exceed the recommended load of 4 casters, because if the weight is large, the caster will be prone to damage when the weight exceeds the recommended weight of 4 casters.

Casters are only used for moving and positioning equipment or transportation purposes. Any use other than the above may cause accidents.

For the loading of equipment or vehicles, it is recommended not to exceed 4 casters.

2. Installation and usage method:

The large load of equipment and objects to be transported shall not exceed the recommended load range of 4 wheels. The appropriate casters should be selected.

Use bolts and nuts to seamlessly glue the sides to install the floor

After the product model is selected, the surface of the processing equipment such as the floor, hole spacing, size, screw and other processing equipment of the selected product will be the same or installable distance as the selected product.

The leveling caster is a multifunctional combination of moving and fixing. Therefore, you must pay attention to the following matters during use, otherwise it will cause damage to the casters, equipment and personnel.

When moving according to product characteristics, it must not exceed 1km/h. When the working environment is uneven, the casters should be lifted or moved slightly to avoid collision.

If it is not matched, the rubber base will touch the ground and the screws will fall off, making the height effect impossible to adjust.